Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Lake Worth, FL
Gate installation in Lake Worth means working with tight coastal lots, 1920s-to-1980s housing stock, and hardware that has to survive salt air nine months of the year. We install automatic and manual gates that fit the way Lake Worth properties are actually built, whether that’s a custom wood gate between coral-rock pillars in the 33460 historic core or a sliding steel gate across a driveway off Lake Worth Road. Call (833) 570-5807 and we’ll measure it and price it before anything gets ordered.
Why Lake Worth Homes Are Different
Lake Worth’s historic coastal core, concentrated in 33460, is packed with 1920s through 1950s wood-frame and masonry bungalows on narrow lots. Gates here are rarely off-the-shelf. They’re custom-fit between existing masonry walls, hedges, or chain-link runs in alleys off Federal Highway and Dixie Highway. The work that dominates this ZIP is alignment, hinge and roller replacement, and salt-air corrosion repair on older steel and wood gates, not installing brand-new vinyl systems.
Move inland toward 33461 and 33463 and you find 1960s through 1980s concrete block and stucco homes with wider driveways and more sliding gates. But the climate is the same everywhere in Lake Worth: subtropical marine air, intense UV, summer thunderstorms that roll in most afternoons between May and October. Steel gates rust faster here than ten miles inland. Wood gates swell, bind, and warp. Vinyl fades. UV eats powder coating. Any installation we do in Lake Worth accounts for that from day one, with corrosion-resistant hardware and finishes chosen for coastal exposure.
One more thing worth knowing: in the historic blocks, gate posts are often set into old coral-rock or tabby walls with narrow alley setbacks. Technicians regularly find gates rubbing against masonry or vegetation. The fix is usually re-shimming or re-hanging, not replacing the gate. That’s the kind of judgment call that comes from working specifically on gates, not splitting time across every trade on a punch list.
Styles & brands we work with
Our Main Lake Worth Services
Most Lake Worth homeowners call us for one of two reasons: a gate that won’t open or close properly, or an electric operator that has stopped responding entirely.
Gate Repair in Lake Worth
Manual and automatic gates in Lake Worth fail in predictable ways, and most of them trace back to the coastal environment. Hinges corrode, steel posts loosen in sandy soil, wood gates sag until they drag on pavers or catch on masonry. We repair the gate itself: re-hang it, replace rollers and hinges, weld cracked steel, and reset posts that have shifted. Salt air accelerates everything, so we use marine-grade hardware on repairs here, not the same parts we’d use inland. Gate Repair in Lake Worth is our most common call, and most jobs are diagnosed in one visit.
Electric Gate Repair in Lake Worth
When an automatic gate stops responding, the problem is almost never the gate leaf. It’s the operator, the control board, a sensor, or a wiring connection corroded by humidity and salt. We troubleshoot at the component level across LiftMaster, FAAC, BFT, DoorKing, Ghost Controls, Mighty Mule, and other major brands. If a loop detector fails after a summer storm, we find it. If a control board shorts from moisture intrusion, we replace it. Electric Gate Repair in Lake Worth is where our brand-agnostic training matters most, because we fix what’s installed rather than pushing a full system replacement.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Gate Installation in Lake Worth
Gate installation in Lake Worth usually means one of two scenarios: a new gate on a first-time build, or a replacement gate on a property where the old one has finally given up to corrosion, warping, or an operator that’s no longer worth repairing. In the 33460 historic district, installations are custom-fit between existing masonry or hedge lines. Inland in 33461 and 33463, the work more often involves sliding driveway gates and automatic operators on wider lots. Either way, we’re the single point of contact from first measurement to a gate that opens and closes correctly. See our full service range on our Gate Installation page.
Automatic Gate Installation
Signs you need it
A manual gate that gets opened and closed multiple times a day, or a property where controlled access is becoming a real concern rather than a convenience.
What it costs in Lake Worth
Automatic gate installation in Lake Worth typically runs $4,500 to $14,000 depending on gate size, operator type, and whether new posts or conduit runs are required.
How we do it
We measure the opening, check post integrity and power access, install the gate and operator, then run a full safety check with sensor and travel-limit calibration.
Driveway Gate Installation
Signs you need it
A driveway that needs a physical barrier that still works with the property’s existing look, whether that’s a modern stucco home or a 1940s bungalow.
What it costs in Lake Worth
Driveway gate installation in Lake Worth typically falls between $3,000 and $12,000, with swing gates at the lower end and sliding steel at the higher end.
How we do it
We set or repair posts first, then hang the gate, install the operator if it’s automatic, and adjust everything so the gate moves cleanly through its full arc or slide without binding.
Sliding Gate Installation
Signs you need it
A driveway with limited swing clearance, an uphill entry, or a commercial lot where a cantilever or V-track slide makes more sense than a swing gate.
What it costs in Lake Worth
Sliding gate installation in Lake Worth usually runs $5,000 to $15,000, since it involves a track, rollers, a heavier frame, and often a more powerful operator.
How we do it
We lay the track or set the cantilever posts, install the gate and rollers, mount the operator and rack, and tune the travel limits so the gate stops exactly where it should.
What Gate Installation Costs in Lake Worth
| Item | Typical range in Lake Worth |
|---|---|
| Manual driveway gate installation | $3,000 – $7,500 |
| Automatic gate installation | $4,500 – $14,000 |
| Sliding gate installation | $5,000 – $15,000 |
What pushes a Lake Worth installation toward the high end is usually one of three things: coral-rock post demolition, a long power run from the house to the gate, or a custom gate width that has to be fabricated rather than ordered. Every installation quote is written and agreed before we order materials or start work. No change orders mid-job unless you ask for something different.
Do you handle the power run and safety edges?
Yes. The power run, conduit, concrete pad for the operator, photo eyes, and safety edges are part of the installation we quote. An automatic gate is only done when every safety component is installed and tested.
Can you install a gate on an older Lake Worth property with existing posts?
Often, yes. We assess whether the existing posts are structurally sound, especially if they’re set into old coral-rock walls. If they’re solid, we build the new gate to fit them. If they’re not, we replace or reinforce them first.
Brands We Service in Lake Worth
We service Ghost Controls, DoorKing, Elite, and Mighty Mule along with LiftMaster, FAAC, BFT, Linear, and Viking. Because we’re brand-agnostic, the recommendation you get is based on what’s already on your Lake Worth property and what the system actually needs. Our service vehicles carry common boards, remotes, and sensors so many repairs don’t wait on parts. Browse the full list on our brands page.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Lake Worth, FL
| Service | Typical range in Lake Worth |
|---|---|
| Gate repair diagnostic visit | $85 – $150 |
| Manual gate realignment | $150 – $400 |
| Hinge or roller replacement | $100 – $300 per hinge or roller |
| Gate post reset or reinforcement | $300 – $900 per post |
| Steel gate welding repair | $150 – $600 |
| Electric gate diagnostic | $85 – $150 |
| Control board replacement | $300 – $900 |
| Gate operator motor replacement | $500 – $1,500 |
| Safety sensor replacement | $150 – $400 per pair |
| Manual driveway gate installation | $3,000 – $7,500 |
| Automatic gate installation | $4,500 – $14,000 |
| Sliding gate installation | $5,000 – $15,000 |
Lake Worth pricing runs slightly above inland Palm Beach County on steel and iron work because of the corrosion factor: we specify marine-grade hardware and coatings that hold up to salt air. On installation, the biggest variables are post conditions and power distance. Whatever the job, the price is set in writing before work begins, and that’s the price you pay.
Neighborhoods We Serve in Lake Worth
We work across all four Lake Worth ZIP codes: 33460, 33461, 33462, and 33463. In the historic coastal core, that means bungalow lots with tight side yards and coral-rock posts. Inland, it’s wider driveways, HOA communities, and more commercial gate systems. Response time across the Lake Worth service area is typically same week for diagnostics, with emergency repair calls scheduled based on the day’s route.
- Historic Lake Worth (33460)
- Beverly Beach area
- Mango Groves
- Lake Worth Estates
- Sunset Ridge
Service Area – Cities Near Lake Worth
Miami Gate Company serves Lake Worth and the surrounding communities along the I-95 and Dixie Highway corridor. If you’re just west of the city, we cover Greenacres City, FL and Lake Worth Corridor, FL with the same multi-brand repair and installation services. Just south, we handle Lake Clarke Shores, FL and Palm Springs, FL, where the housing stock and gate hardware are similar to what we see throughout the Lake Worth area.
Serving Lake Worth, FL — Our Local Coverage Area
We’re based in the Lake Worth area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Lake Worth
Diagnostic visits are typically scheduled within the same week, and we run routes through Lake Worth daily since our service area is concentrated in Palm Beach County. If a gate is stuck open or won’t close, call (833) 570-5807 and we’ll work it into the nearest available slot.
Rules vary by property and whether the gate is automatic or manual. Many Lake Worth properties in HOA communities have additional architectural review requirements. We help with the paperwork and measurements, and we’ll tell you honestly if your project needs city approval before we start.
Yes. We service automatic gates at apartment complexes, office lots, and commercial properties throughout Lake Worth, including sliding gates, barrier arms, and card-access systems paired with gate operators. The same component-level diagnostic approach applies, just on heavier equipment.
Call (833) 570-5807 for a free estimate on any gate repair or installation in Lake Worth. The price is quoted and agreed before any work starts.
What happens when you call
- 1A real person answersNo phone trees — talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Lake Worth Customers Say
"Photo eye was misaligned so the gate refused to close after dark. Ten minute fix. He also cleaned the lens and pointed out that the sprinkler head was spraying it every morning, which is why it kept happening."
— Chris Norris"Control board fried after a lightning storm. He showed me the burn mark on it, quoted the board, and installed a surge protector on the line so it hopefully doesn't happen again."
— Alma Vargas"Gate works properly now and the price was fair. The one thing is that it took two visits, because the operator model we have is old and the part had to be ordered. They didn't charge for the second trip."
— Bethany Hayes