Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGhost Controls Gate Repair in Davenport, FL | Miami Gate Company
We provide independent Ghost Controls gate repair across Davenport, working on AXO swing arms, Titan slide operators, and the solar/battery kits common on vacation villas along the US-27/I-4 corridor. The thing that sets our Ghost Controls work apart here is that we already know Davenport’s two service rhythms: the rental gate that fails on a Saturday morning before check-in, and the HOA-governed subdivision gate where replacement hardware has to meet architectural approval. Call (833) 570-5807 for a Ghost Controls diagnosis that starts with the actual fault, not a parts swap guess.

Why Davenport Residents Choose Us for Ghost Controls Service
Ghost Controls is a DIY-class operator brand, which means most units in Davenport were either self-installed or put in by a builder’s crew. That’s fine until the board gets cooked by a lightning strike in July or the 12V battery sulfates after a rental season of short cycles. We handle Ghost Controls sales & service the way a specialist should: we know the AXO and Titan platforms at a component level, and we aren’t reading off a manufacturer script when we open the housing. Ruben Castellano, our owner, spent his early years watching his uncle rewire and fix mechanical systems off Okeechobee Road, then formalized that with industrial mechanics training at Miami Dade College before spending nearly two decades on gate systems across Central and South Florida. That means our techs trace a problem to the board, battery, photo-eye, or gate geometry before touching anything else. “If you don’t know exactly what failed, you’re just guessing with someone else’s money.” No other gate repair shop in Davenport can say that about work on your Ghost Controls unit.
Styles & brands we work with





Common Ghost Controls Gate Repair Problems We Solve in Davenport
- Control board failure after lightning and power surges. Davenport sits right in the summer squall corridor along US-27 and I-4, and the afternoon storms here are relentless. A single strike can spike a Ghost Controls board and leave the arm dead. We replace OEM boards, not chinese aftermarket copies, and re-flash the limits so the gate behaves exactly as it should.
- Dead or sulfated 12V backup batteries in solar-charged kits. Vacation villas in 33896 and 33897 sit empty for months, then run hard for a week. The Ghost Controls 12V solar/battery kits never get a full charge cycle through the off-season. We see sulfated batteries all the time in rental communities around Posner Park. Fresh battery installed, charge circuit checked, gate verified before you hand over the key to the management company.
- Photo-eye and safety-reverse faults from UV and storm-driven rain. Central Florida’s UV clouds the sensor lenses, and heavy rain knocks brackets out of alignment. We also see a lot of gates left half-open by rental guests who forced the gate and interrupted the beam. On Davenport’s builders-grade gates, a photo-eye that’s even slightly out of aim makes the operator reverse mid-cycle. We re-aim, seal, and test the safety reverse every time.
- Sagging or out-of-plumb gates on builder-grade posts. In ChampionsGate and Providence, the production home posts shift over time, and the gate starts dragging. A healthy Ghost Controls AXO arm working against a gate that’s no longer square is an arm that eats itself. We re-shim hinges, square the gate, and only then set the operator limits.
- Arm geometry issues from DIY installs. If the previous owner installed a Ghost Controls kit themselves, we often find the arm geometry isn’t right for the gate’s throw. The arm either labors at the end of stroke or slams the gate. We correct mounting positions and re-set open and close limits so the gate closes crisp, not with a thud that disturbs the whole street.
Ghost Controls Service in Davenport: What Local Conditions Mean for Your Equipment
Davenport’s automated gate inventory runs on two very different clocks. On one side, the resort rental villas in 33896 and 33897: a gate failure surfaces as a Saturday-morning guest complaint before the next check-in, and the property manager needs it fixed on the spot. On the other side, the 55+ and family subdivisions in 33836 and 33837, like Ridgewood Lakes: an HOA architectural standard governs what replacement hardware is even allowed. A single Four Corners Ghost Controls service repair here has to satisfy either a property manager’s same-day deadline or an association’s approved finish, and rarely both the same way. A property manager at a ChampionsGate vacation villa called us one Saturday after a guest reported the driveway gate stuck half-open. Our tech found the Ghost Controls AXO swing arm cycling but reversing immediately: the photo-eye bracket had been knocked out of aim by a lawn crew visit, and the 12V battery was already low from short rental cycles. We re-aimed and sealed the photo-eyes, replaced the battery, and re-tuned the limits so the gate latched clean before the afternoon check-in. That’s the Davenport reality: sunny-day gate hardware has to survive UV, thunderstorms, lawn crews, and a stream of renters who don’t know how to treat a gate.
Ghost Controls Models & Products We Service in Davenport
We service the full Ghost Controls in Loughman lineup as independent technicians, not a factory-authorized shop. That covers the AXO heavy-duty single-swing kits (AXO201 and AXO202), the Titan series slide operators (TSS1), dual-swing and solar/battery 12V DC kits on vacation-villa driveway gates, and the tube-gate and decorative-gate accessory line: keypads, photo-eyes, additional remotes. For parts, we keep genuine Ghost Controls boards, arms, and harnesses on our trucks, and we use quality aftermarket batteries, photo-eyes, and hardware when the OEM part adds cost without adding useful life. You will always know which one we’re putting on your gate and why.
See the difference
Before
After
Before
After
Before
AfterGhost Controls Service Pricing in Davenport
What you pay for Ghost Controls gate repair in Davenport depends on the fault. A service call with diagnosis runs $85 – $150 in this area. If the problem is a photo-eye alignment or a limit re-tune, you’re looking at $120 – $220 all-in. Board replacement with OEM parts runs $190 – $390 installed depending on the model. Battery replacement, including a quality 12V battery, costs $80 – $160. Full arm replacement for a working board runs $160 – $320. Every job we do comes with a written quote before any work starts, so you know the number up front. Call (833) 570-5807 for an exact quote. Estimates are free, and we will tell you if a board swap beats a new operator.
Serving Davenport, FL — Our Local Coverage Area
We’re based in the Davenport area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Ghost Controls Gate Repair in Davenport
The usual cause in Davenport is a photo-eye that’s been knocked out of aim by rain, wind, or a forced gate, or a photo-eye lens clouded from months of UV exposure. The operator detects an interrupted beam and reverses as a safety measure. We re-aim the photo-eyes, clean or replace the lenses, seal the brackets, and test the safety reverse so the gate closes fully. Call (833) 570-5807 and we’ll trace the exact fault.
Not usually. What we most often find on solar-charged Ghost Controls kits that sat unused through the off-season is a sulfated or dead 12V battery. Let us charge-test the battery, check the board, and verify the solar input before you spend money on a new operator. Most dead-after-winter gates are just dead batteries. Call (833) 570-5807 for a diagnosis before you replace a working operator.
Many subdivisions in 33836 and 33837 have architectural guidelines that cover gate hardware. If your gate is part of the front elevation, the association may need to approve finish, arm color, or operator placement before we install. We’re used to working with HOAs in Davenport, and we can help you get the right paperwork in front of the review board for any Ghost Controls service in Citrus Ridge installation.
We prioritize rental-turnover gate failures in Davenport’s 33896 and 33897 communities. If you call us before noon, we can usually get a tech to ChampionsGate, Providence, or the villa corridor the same morning. Our trucks carry the common Ghost Controls boards, batteries, and photo-eyes to handle most failures in one visit. Call (833) 570-5807 and tell us the gate is gate-blocking a check-in, and we’ll move it up.
No. We are an independent gate repair company, not authorized, partnered with, or endorsed by Ghost Controls. That independence is the point: we diagnose what the gate actually needs, not what a manufacturer incentive tells us to push. We fix Ghost Controls units because we know them, not because we’re attached to the brand.
Service Areas Near Davenport
We serve Davenport service area and the surrounding communities, including Hialeah, North Miami, Miami, Allapattah, and Miami Beach. For those on the west side of the corridor, we also provide Ghost Controls service in Samoset and Ghost Controls service in Wimauma. If your gate is anywhere near Davenport, call and ask.
Book Your Ghost Controls Service in Davenport Today
If your Ghost Controls gate is acting up in Davenport, call (833) 570-5807 now. We’ll schedule a free estimate, diagnose the actual fault, and have your gate running right. Whether it’s a rental villa in 33896 or a family home in 33837, we’ll get your gate back to work.
Written by Ruben Castellano, Owner at Miami Gate Company, serving Davenport and Central Florida with independent Ghost Controls service in Celebration repair and installation.