Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGhost Controls Gate Repair in McGregor, FL | Miami Gate Company
We provide independent Ghost Controls gate repair across McGregor, FL and nearby communities like Ghost Controls repair in Whiskey Creek, specializing in swing and slide operators that have failed from salt corrosion, battery fatigue, or hinge drag on older river-front properties. What sets our Ghost Controls work here apart is simple: we diagnose the gate, post, and hardware as one system, not just the operator. If your Ghost Controls arm is dead, faulting, or stalling on a rusted wrought-iron gate near the Caloosahatchee, call (833) 570-5807 for a free estimate.

We are Miami Gate Company, led by Ruben Castellano. We service the full Ghost Controls sales & service line across McGregor service area, and we are brand-agnostic. That means we fix what you have, not what a manufacturer would prefer to sell you.
Why McGregor Residents Choose Us for Ghost Controls Service
McGregor homeowners call us because we know Ghost Controls operators down to the charge controller, actuator arm, and the sealed 12V battery that tends to fail after prolonged low sun and summer storm outages. Ruben Castellano traces an electrical fault the same way he learned in Industrial Mechanics at Miami Dade College: test the motor, the board, the sensors, and the wiring before touching a single part swap. “If you don’t know exactly what failed, you’re just guessing with someone else’s money.”
We’re an independent Ghost Controls service provider. We are not manufacturer-affiliated or authorized. That independence matters in McGregor because we recommend the repair that actually fits your gate and your river-front conditions, not a whole new operator when only a hinge or battery terminal is failing. We use genuine Ghost Controls boards, arms, batteries, and remotes where the OEM part is the reliable fit, and quality aftermarket stainless fasteners, sealed connectors, and hinges where the original spec is the weak point in salt air.
McGregor’s older housing stock, much of it mid-to-late 20th century wrought iron and original driveway gates, means we do more rust rehab and component-level repair here than new operator installs. That’s what we’re built for.
Styles & brands we work with





Common Ghost Controls Gate Repair Problems We Solve in McGregor
- Solar charge-controller and 12V battery failure. McGregor’s humid subtropical climate means long wet-season cloud cover followed by intense UV. A Ghost Controls panel can look clean while the sealed battery underneath is only half-charging. We see dead arms even when the board still lights up, especially after consecutive summer storm days.
- Actuator arm binding and reverse faults on sagged swing gates. Original wrought-iron frames on McGregor’s older single-family homes rust and pit in salt air, then the gate leaf twists or sags. The Ghost Controls arm fights that geometry and faults out. We repair the hinge and gate alignment before condemning the operator.
- Photo-eye, keypad, and battery-terminal corrosion. Green terminals and clouded lenses show up long before the aluminum housing looks bad, particularly on gates facing the river or within a few blocks of the Caloosahatchee. We clean, seal, and replace connectors where salt has gotten in.
- Limit and arm-geometry drift after ground saturation. McGregor’s sandy soils saturate fast in storm season. A hinge or post settles a quarter inch, and a Ghost Controls operator that used to swing cleanly now stalls or reverses. We reset arm geometry and re-pin the hinge instead of forcing the motor to work harder.
- Battery-terminal and fuse failure on dual-swing solar systems. Dual Ghost Controls swing operators run two arms off one solar controller. Corrosion on one battery or terminal drops voltage unevenly, causing one leaf to move and the other to fault. We clean and isolate circuits to find the exact failure point.
Ghost Controls Service in McGregor: What Local Conditions Mean for Your Equipment
McGregor sits directly on the Caloosahatchee across from downtown Fort Myers, and homes whose driveway gates face the river corrode far faster than gates a few blocks inland. We find pitted iron and seized rollers on river-facing Ghost Controls swing gates within a few seasons, while sheltered gates on the same street are still smooth. That’s not a random difference. It’s salt-laden air from the river and nearby Gulf pushing through the same hinges, rollers, and battery terminals every afternoon breeze.
On a river-fronting stretch of McGregor’s older single-family blocks, a homeowner’s Ghost Controls dual-swing solar operator kept faulting out at midday even with a clear panel. Our tech found the river-side gate leaf had sagged on a rust-pitted wrought-iron hinge and the arm was fighting it, while the battery was only half-charging under the shaded panel mount. We welded and re-pinned the hinge, reset the arm geometry, and remounted the panel clear of the roofline so the operator cycles cleanly again. That’s a typical McGregor repair: two problems at once, one electrical and one structural, both caused by the river environment.
Ghost Controls Models & Products We Service in McGregor
We service the full Ghost Controls line: the Heavy-Duty Single Swing (AXS/AS series solar swing openers), Dual Swing Gate Operator tandem systems, Slide Gate Operator rack-and-pinion solar slides, and Tube Gate decorative opener kits, with Ghost Controls in Pine Manor also covered. We stock or quickly source genuine Ghost Controls replacement boards, arms, batteries, remotes, and keypads, plus stainless fasteners, sealed connectors, and heavy-duty hinges for McGregor salt-air repairs. If the operator tests healthy and only the gate, post, or hinge is failing, we repair that instead of selling a motor you don’t need.

See the difference
Before
After
Before
After
Before
AfterGhost Controls Service Pricing in McGregor
Ghost Controls gate repair in McGregor typically runs $145 to $340 for common component-level work, including battery replacement, board diagnostics, hinge alignment, and corrosion cleanup. Full operator replacement or dual-arm motor swaps range $650 to $1,400, depending on the model and gate condition. Rusted wrought-iron gate repair, including weld and re-pin work, often adds $300 to $800. We quote the exact price before any work begins, so you know the number up front. Call (833) 570-5807 for a free estimate.
Serving McGregor, FL — Our Local Coverage Area
We’re based in the McGregor area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Ghost Controls Gate Repair in McGregor
The river-side gate leaf takes more salt exposure, so its hinges rust and bind faster, and the operator arm fights that drag and faults. We weld or replace the hinge, reset arm geometry, and seal the connection points. Call (833) 570-5807 if you’re seeing this.
In McGregor, yes, usually. Consecutive wet-season cloud days starve the 12V battery while the board still lights up, so the arm goes dead. We test the battery under load and replace it if it won’t hold charge. Call (833) 570-5807 for a battery check.
Yes, we weld, re-pin, and reinforce original wrought-iron gates in McGregor all the time. If the frame is structurally sound, we repair it and keep your Ghost Controls operator working with it. Call (833) 570-5807 for a gate condition assessment.
Yes. We repair Ghost Controls operators regardless of who installed them. We are independent, so we diagnose the motor, board, sensors, and wiring honestly and repair the failed part. Call (833) 570-5807 to schedule a diagnosis.
In McGregor, we recommend sealing battery terminals, checking panel mounting before storm season, and re-pinning hinges on river-facing gates before they snap. We also clean photo-eye lenses and keypad contacts after every salt-heavy storm stretch. Call (833) 570-5807 for a pre-season tune-up.
Service Areas Near McGregor
We also provide Ghost Controls service in Iona, Ghost Controls service in North Fort Myers, and nearby Southwest Florida communities including Fort Myers, Cape Coral, and San Carlos Park. If you’re near McGregor but outside the immediate ZIP, call us and we’ll confirm coverage.
Book Your Ghost Controls Service in McGregor Today
If your Ghost Controls gate is dead, faulting, or binding in McGregor, call (833) 570-5807 for a free estimate. We quote the price before any work starts, and we’re often able to schedule quickly. Ruben and our team will diagnose the actual failure and fix the part that failed, not sell you a system you don’t need.
Written by Ruben Castellano, Owner at Miami Gate Company, serving McGregor and the Caloosahatchee river communities.