Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGhost Controls Gate Repair in Jupiter, FL | Miami Gate Company
We’re Miami Gate Company, and we provide Jupiter Gate Repair for Ghost Controls systems throughout the area, including the rural solar-fed driveways of Jupiter Farms and the salt-exposed coastal entries near the inlet. Our work here is different because we see what these specific properties do to a Ghost Controls operator: failing 12V batteries from shade, corroded terminal blocks, and hinge posts that shift in sandy soil. If you have a Ghost Controls gate that’s stalling or dead, call us at (833) 570-5807 for a free estimate. We’re independent, we know this brand deeply, and Jupiter is in our service area every week.

Why Jupiter Residents Choose Us for Ghost Controls Service
Ghost Controls makes solid DIY-friendly operators, but the reality is that Jupiter’s climate pushes every component harder than the manufacturer’s typical installation assumes. We work on Ghost Controls solar and DC swing and slide operators constantly, so we know the arm geometry, the battery and charge-controller quirks, and the failure patterns that come with self-installed kits. When a gate stops moving, our techs trace the actual fault before swapping parts. That’s how Ruben Castellano, our owner, has run things since his days studying industrial mechanics at Miami Dade College. He’s spent years diagnosing gates that other shops miss, and he’s drilled the same habit into every tech we send into Abacoa, Jonathan’s Landing, and the rest of Jupiter. We’re Ghost Controls sales & service specialists in the sense that we know this brand’s products well enough to fix them right the first visit, not because we carry a manufacturer decal.
Styles & brands we work with





Common Ghost Controls Gate Repair Problems We Solve in Jupiter
These are the Ghost Controls failures we see most often on Jupiter properties:
- Dead or slow-recovering 12V batteries from shaded solar panels. Jupiter Farms driveways are long and often lined with live oaks, and a panel that gets four hours of sun can’t keep a battery healthy. The gate cycles a few times, stalls mid-travel, and the control board reads it as a motor fault when the real problem is upstream in the charging circuit.
- Salt-fog corrosion at the control board terminals and keypad faces. Properties near the Jupiter Inlet and oceanfront HOAs get salt air that looks harmless but sits on aluminum housings and works its way into connectors. We open the box, and the board terminals are green and pitted while the outside still looks fine. Ghost Controls boards aren’t sealed against that kind of exposure.
- Swing arms binding and reversing on shifted or rusted hinge posts. Jupiter’s sandy soil shifts with rain and drought cycles, and posts that looked square at install time can lean within a few seasons. The Ghost Controls arm pushes against geometry it wasn’t set for, trips the obstruction sensor, and reverses the gate. Ocean-facing hinges near the inlet rust at the ground line and make it worse.
- Post-storm water intrusion into control boxes on exposed driveway gates. After a hurricane or a hard afternoon line of storms, wind-driven rain gets past seal lips and sits inside the control enclosure. The board corrodes or shorts out. On Ghost Controls units, the enclosure gaskets need to be checked and replaced periodically, and most homeowners never do it until the gate stops dead.
- Keypad and photo-eye lens fogging from UV and salt exposure. Jupiter sun is hard on plastic lens covers. They cloud over, the photo-eye beam scatters, and the gate refuses to close or reverses unreasonably. Keypad buttons crack, then water gets behind the membrane and the code entry becomes intermittent. These are cheap fixes when caught early, but they’re the call most people put off.
Ghost Controls Service in Jupiter: What Local Conditions Mean for Your Equipment
Jupiter Farms is off the municipal water and sewer grid, and its long rural driveways sit far back from the meter, which is exactly why so many Ghost Controls units there are solar-charged rather than trench-fed. That single fact changes the whole diagnostic picture. A gate that stops opening in Jupiter Farms is far more likely to be a shaded panel or a weak 12V battery than a failed motor. On a recent call on a driveway gate set well back from the house, the homeowner’s Ghost Controls solar swing kit had been stalling halfway open for a week. Our tech metered the panel and found it shaded by a live oak most of the afternoon, so the battery never recovered and the arm was fighting a gate leaf whose hinge had also rusted. We relocated the panel to the sun, replaced the battery and hinge hardware, and re-set the arm limits so the gate cycled cleanly on solar alone. If you’re in the 33478 ZIP and your Ghost Controls gate has gotten lazy, start with the power side. It’s usually where the answer is.
Ghost Controls Models & Products We Service in Jupiter
We repair the full Ghost Controls product range you’re likely to have on a Jupiter property. That includes the Heavy-Duty Dual Swing TDS series solar and battery driveway opener kits, the single swing TS and AX tubular-arm operators, the solar slide operators with add-on battery backup kits, and the keypad, remote, and photo-eye accessory sets sold in DIY kits. We use Ghost Controls OEM boards, arms, batteries, and solar charge controllers when the housing and gearing are sound, and quality aftermarket batteries and hardware where OEM adds no real value. If a corroded board, a seized gearbox, and a sagging gate all stack up on the same unit, we’ll tell you plainly that the system needs replacement rather than throwing parts at it. Having the right parts staged for Jupiter’s common failure modes means we can turn most repairs around quickly without waiting on a shipment from out of state.
See the difference
Before
After
Before
After
Before
AfterGhost Controls Service Pricing in Jupiter
Ghost Controls gate repair in Jupiter typically runs between $180 and $340 for most service calls, depending on what failed. Here’s what drives the cost:
- Basic troubleshooting and limit re-setting: $180 to $240. This covers the diagnostic, travel to your Jupiter property, and correcting arm limits, obstruction sensitivity, and keypad programming.
- Battery replacement (12V or add-on backup): $120 to $220. More if we’re relocating the solar panel or replacing the charge controller as well.
- Control board replacement: $260 to $480. OEM Ghost Controls boards are the standard; we also check for the water intrusion that killed the old one so the new board doesn’t follow it.
- Photo-eye or keypad replacement: $150 to $260 per component. Includes re-aiming, wiring, and testing the safety circuit.
- Full arm or gearbox replacement on a swing gate: $340 to $700. This is the call where we’ll recommend replacement if the gate structure itself has shifted and the new arm would inherit bad geometry.
Every price is quoted and agreed before we start work. You’ll know the number before our tech touches the gate. Call (833) 570-5807 for an exact quote on your Ghost Controls system, estimates are free and there’s no charge to talk through what you’re seeing.
Serving Jupiter, FL — Our Local Coverage Area
We’re based in the Jupiter area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Ghost Controls Gate Repair in Jupiter
Usually not. Most of the time on a Ghost Controls swing or slide, a partial-travel stop is a power problem, a binding hinge, or an obstruction sensor that’s reading resistance it shouldn’t. We check the battery voltage first, then the charge controller, then whether the gate leaf has shifted on its hinge. The motor is generally the last suspect. Call (833) 570-5807 and describe where exactly the gate stops, and we can give you a clearer picture before we even schedule the truck.
Salt air. The fine salt fog that comes off the ocean near the inlet settles on plastic lens covers and keypad membranes, clouds them, and works into the connections behind them. Ghost Controls residential kits are built for general outdoor use, not constant marine exposure. We replace the affected parts and can recommend sealing upgrades that slow the next failure down. If you’re within a mile of the inlet, expect to replace photo-eyes and keypads more often than someone in west Jupiter. Call us at (833) 570-5807 for a free estimate on component replacement.
Yes. We take on self-installed Ghost Controls systems all the time in Jupiter Farms. The common issues are under-sized wire runs, solar panels that ended up in shade, and arm limits that were set with the gate in the wrong position. We’ll diagnose the existing install, correct what’s correctable, and tell you if any part of the layout needs reworking. You don’t need to redo the whole thing. Call (833) 570-5807 and we’ll walk through what you’re seeing before the visit.
Ghost Controls battery-backed systems are designed to cycle during power outages, but the weak link in Jupiter is the storm preparation and the enclosure sealing, not the battery itself. If the control box takes wind-driven rain, the board can short before the battery ever runs down. If the gate has to move against hurricane-force winds to close, that’s a different stress a residential arm wasn’t really built for. We recommend checking enclosure gaskets before storm season and making sure the battery is healthy so you don’t discover a dead gate on the first day of an outage. We’ll check both on a service call, call (833) 570-5807 to schedule one.
Yes. We service residential and commercial gate systems across Jupiter, including the community entry gates in Abacoa, Jonathan’s Landing, and the gated neighborhoods throughout 33458 and 33468, plus we handle Ghost Controls repair in Juno Beach as well. For HOA boards and property managers, we provide documented diagnostics so the repair decision is clear and defensible. We’re back in those communities regularly, not learning the layout for the first time. Call (833) 570-5807 to discuss a Ghost Controls entry gate that’s not performing.
Service Areas Near Jupiter
We run Ghost Controls service all over Jupiter proper, from the inlet-side oceanfront communities to Jupiter Farms. We also work in the surrounding areas including Jupiter service area neighborhoods, and we handle Ghost Controls calls in Ghost Controls service in Limestone Creek and Ghost Controls service in Harlem when those gates share the same style of operators and failure patterns we see around Jupiter.
Book Your Ghost Controls Service in Jupiter Today
If your Ghost Controls gate is stalling, dead, or acting like it’s got a mind of its own, don’t wait for the next storm. Call (833) 570-5807 and we’ll get a tech out to you in Jupiter, usually the same day for urgent failures. The estimate is free, the diagnosis is honest, and the price is set before we start.
Written by Ruben Castellano, Owner at Miami Gate Company, serving Jupiter and the surrounding area, including Ghost Controls service in Tequesta.