Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGhost Controls Gate Repair in Royal Palm Beach, FL | Miami Gate Company
We repair Ghost Controls gate operators across Royal Palm Beach, FL, and we’re an independent service provider, not an authorized Ghost Controls dealer. The difference matters here more than most places: Royal Palm Beach’s original village-core neighborhoods, La Mancha and Crestwood especially, have gate posts set in shallow sandy-shell fill. When a Ghost Controls swing operator trips or reverses after heavy rain, the board is usually fine, the post has settled. Call (833) 570-5807 for a repair estimate from a technician who checks the post before blaming the electronics.

Why Royal Palm Beach Residents Choose Us for Ghost Controls Service
We work on Ghost Controls operators weekly across Palm Beach County, so we don’t guess at the brand. We know how the Heavy-Duty Dual Swing AX-series arms behave when a hinge post drops three inches. We know how the Solar-Ready TSS1 reacts when battery terminals corrode in salt-humid air. Royal Palm Beach’s mix of wide driveways, sliding estate gates, and long side-yard runs means we see the full Ghost Controls line in this one ZIP code. We handle Ghost Controls sales & service the same way our owner, Ruben Castellano, learned it: trace the actual fault before touching anything. That approach comes from industrial mechanics training and almost twenty years of diagnosing South Florida gate failures. If you don’t know exactly what failed, you’re just guessing with someone else’s money.
Styles & brands we work with





Common Ghost Controls Gate Repair Problems We Solve in Royal Palm Beach
- Post settlement tripping the obstruction sensor. In the older subdivisions around Royal Palm Beach, the original gate posts were often set in shallow sandy-shell fill. After heavy summer rain, the hinge-side post sinks, the Ghost Controls arm goes out of geometry, and the operator reverses mid-cycle. The board, motor, and photo-eyes test fine.
- Lightning-surge damage to low-voltage control boards. Royal Palm Beach gets frequent afternoon thunderstorms, and driveway gates here often have long exposed wire runs from the house to the operator. A nearby strike fries the Ghost Controls board or the photo-eye circuit even when the motor still runs.
- Arm bracket and hinge pivot corrosion. Salt-humid subtropical air accelerates pitting on powder-coated steel and hurricane-rated aluminum gate hardware. Ghost Controls arm brackets and battery terminals corrode faster here than inland, and we see that on gates less than five years old.
- Slide-track muck and water pooling. Summer squalls push sand, grass clippings, and standing water into slide-gate tracks. Ghost Controls slide operators stall on the limits, and homeowners often think the controller failed. It’s usually a fouled track and a soaked limit switch.
- Battery backup and solar panel faults. Ghost Controls solar-ready and battery-backup systems on Royal Palm Beach driveway gates suffer from corroded battery harnesses and dirty panel connections, especially after weeks of afternoon rain followed by hot sun.
Ghost Controls Service in Royal Palm Beach: What Local Conditions Mean for Your Equipment
Royal Palm Beach is a 1950s-80s planned village of low-density, lot-and-block subdivisions. Most homes are single-story CBS or stucco block on generous lots with long driveways, and the gates are wide, dual-swing or sliding estate gates, often hurricane-rated aluminum or powder-coated steel. That’s the setting. The failure pattern we see in La Mancha and Crestwood specifically: original driveway gate posts set in shallow sandy-shell fill. After a week of afternoon storms, a Ghost Controls swing operator will trip or reverse because the hinge post has moved, not because the motor failed. In La Mancha, a homeowner’s dual-swing Ghost Controls system kept reversing mid-cycle after a week of storms. Our tech found the hinge-side post had settled several inches, throwing the arm out of geometry and tripping the obstruction sensor. We re-set and re-plumbed the post, re-clocked the arm, and the original board and motor tested fine. No operator replacement needed. That’s the Royal Palm Beach diagnosis a generic Ghost Controls page won’t give you.
Ghost Controls Models & Products We Service in Royal Palm Beach
We service the Ghost Controls Heavy-Duty Dual Swing Gate Opener (AX-series dual), the Solar-Ready Single Swing Gate Opener (TSS1), the Slide Gate Opener (ARS/AS-series), and the DIY Swing Gate Opener Kit with keypad and photo-eye bundle. For parts, we use OEM Ghost Controls control boards, arms, and battery harnesses where fit and reliability matter. For photo-eyes, keypads, and stainless hardware, we often use quality aftermarket components that outperform the original in salt air. We stock the common Ghost Controls boards and harnesses for faster turnaround in Royal Palm Beach, and we repair rather than replace when the operator tests healthy and the real fault is a settled post, sagging hinge, or corroded terminal.
See the difference
Before
After
Before
After
Before
AfterGhost Controls Service Pricing in Royal Palm Beach
Ghost Controls gate repair in Royal Palm Beach varies by the job. A service call and diagnosis typically runs $75 – $125. Photo-eye replacement usually lands between $150 – $275. Control board replacement, if lightning got it, typically runs $250 – $450. Battery replacement for backup systems is $100 – $250. Complete Ghost Controls operator replacement, including labor, usually falls between $850 – $1,800 depending on the model and the condition of your posts and hinges. Post re-setting and re-plumbing in the village core starts around $350 and goes up with the amount of settlement. Every estimate is free, and we quote the full price before any work starts. Call (833) 570-5807 for an exact number on your gate.
Serving Royal Palm Beach, FL — Our Local Coverage Area
We’re based in the Royal Palm Beach area and also handle Ghost Controls repair in Loxahatchee Groves, so we know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.

FAQs – Ghost Controls Gate Repair in Royal Palm Beach
In most Royal Palm Beach cases, the hinge-side post has settled in the shallow sandy-shell fill common in La Mancha and Crestwood. The post drops, the Ghost Controls arm goes out of geometry, and the obstruction sensor trips. The board and motor are usually fine. We check post settlement before we condemn any electronics. Call (833) 570-5807 and we’ll diagnose it on site.
Yes, over time. Salt-humid air accelerates corrosion on battery terminals, board connectors, and photo-eye housings. Long exposed wire runs from the house to the gate also make Royal Palm Beach systems more vulnerable to lightning surge damage during afternoon thunderstorms. We clean, re-terminate, and where needed, replace corroded parts with hardware that handles salt air better. Call (833) 570-5807 for an estimate.
Yes. We re-set and re-plumb settled posts in royal Palm Beach’s older subdivisions, then re-clock the Ghost Controls arm and re-test the full system. In many cases, the operator itself is still healthy and doesn’t need replacement. Call (833) 570-5807 to schedule a post and gate inspection.
Usually not. A nearby lightning strike typically takes out the low-voltage control board, the keypad receiver, or the photo-eye circuit first. The motor often still runs. We test the board and receiver before touching the motor. Call (833) 570-5807 and we’ll trace the actual failure.
Yes. We service Ghost Controls solar-ready and battery-backup operators, including corroded battery harnesses, dead backup batteries, and dirty or failed solar panels. Royal Palm Beach’s salt-humid air is hard on battery terminals, so we check connections and test draw before recommending any replacement. Call (833) 570-5807 for a free estimate on your solar or backup system.
Service Areas Near Royal Palm Beach
We serve all of Royal Palm Beach, FL, ZIP code 33421, plus surrounding Palm Beach County communities. If you’re in Hialeah, North Miami, Miami, Allapattah, Miami Beach, or Brownsville, we cover those too. For Ghost Controls work further south, see our Ghost Controls service in Islamorada page. For coastal Palm Beach County, see Ghost Controls service in Palm Beach. And for a full look at the area we cover, visit our Royal Palm Beach service area page.
Book Your Ghost Controls Service in Royal Palm Beach Today
Call (833) 570-5807 and tell us what the gate is doing. We’ll schedule a visit, diagnose the actual fault, and quote the full price before starting. We repair Ghost Controls operators across Royal Palm Beach and provide Ghost Controls repair in Wellington, and we don’t replace a board when the post is the problem.
Written by Ruben Castellano, Owner at Miami Gate Company, serving Royal Palm Beach and greater Palm Beach County.