Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGhost Controls Gate Repair in Washington Park, FL | Miami Gate Company
We provide independent Ghost Controls gate repair across Washington Park, FL 33311, and the work here looks a little different than in newer subdivisions. Most of the Ghost Controls operators we service in Washington Park are mounted on older swing gates that pull inward over short, uneven driveways, which means we diagnose the gate and the post as much as the operator itself. If your Ghost Controls system is reversing mid-cycle, refusing to open, or draining its battery too fast, call us at (833) 570-5807. We’re a Ghost Controls sales & service specialist serving Washington Park and the surrounding area.

Why Washington Park Residents Choose Us for Ghost Controls Service
We work on Ghost Controls solar and low-voltage swing-gate operators every week across Miami-Dade, from our Boulevard Gardens Ghost Controls service area to Washington Park, so the AXS and Titan boards, the arm geometry, and the way these kits behave on old iron gates are all familiar ground. Ruben Castellano, our owner, spent years studying industrial mechanics at Miami Dade College’s Wolfson Campus before pivoting exclusively to gate systems, and that motor and control-circuit background is exactly what Ghost Controls troubleshooting demands. We’re an independent repair shop, not an authorized Ghost Controls dealer, which means we fix what you have rather than steering you toward a replacement you might not need. If you don’t know exactly what failed, you’re just guessing with someone else’s money, and in Washington Park, guessing wrong usually means a gate that drops again after the next downpour.
Styles & brands we work with





Common Ghost Controls Gate Repair Problems We Solve in Washington Park
- Control-board and battery faults after summer storm surges. Washington Park gets near-daily wet-season lightning from late May through September, and a surge that finds the low-voltage line will take out an AXS or Titan control board without any visible damage. We also see plenty of batteries that were already weak from humidity and then fail outright after a storm.
- Arm bracket and post-plate failures on rusted steel posts. Many Washington Park gates are chain-link or iron swing gates hung on posts set decades ago. The Ghost Controls operator arm is fine, but the gate-mount bracket tears out of a 1960s concrete-block-and-iron gate that’s shifted out of plumb, and the operator can’t push against that.
- Settling footings after downpours. Water softens the soil around old posts fast here. A Ghost Controls opener pushing a gate that suddenly drags or binds because its post settled an inch will reverse, over-travel, or throw a force error. This is a routine Washington Park call after a heavy afternoon storm.
- Solar panel and photocell issues. Overgrown yard vegetation shades panels on Washington Park’s narrow lots, so the battery never reaches full charge. Salt-corroded entrapment-sensor lenses cause intermittent no-open or false-reverse calls, especially on gates closer to the coast side of the 33311 grid.
- Remote and keypad failures in high humidity. South Florida’s summer humidity creeps into keypad housings and remote battery compartments. Contacts corrode, buttons get flaky, and a system that worked in January gets inconsistent by July.
Ghost Controls Service in Washington Park: What Local Conditions Mean for Your Equipment
Washington Park’s post-war concrete-block homes were built with short driveways opening straight onto narrow residential streets. That layout dictates how Ghost Controls operators get installed here: most driveway gates can’t swing outward into the street, so the operator arm has to pull the gate inward, often over a foot of uneven, water-softened slab. That’s why sag and bind calls spike after storms in Washington Park in a way they don’t in communities like Rock Island, where our Ghost Controls service sees newer subdivisions with wider setbacks and outward-swinging gates. When the slab settles or the post leans, the arm fights a gate that’s no longer moving in the plane the control board expects, so the opener reverses and the owner assumes the motor died. On a recent Washington Park call, a homeowner’s Ghost Controls AXS single-swing kit had stopped opening reliably after a week of afternoon thunderstorms. The gate would start, then reverse. We found the gate-mount bracket pulling loose from a rusted steel post and the post itself had settled, so the arm was fighting a gate that had dropped out of plumb. We reset and re-anchored the post, re-welded the bracket, realigned the arm, and the operator ran clean again without touching the board. That’s the Washington Park version of Ghost Controls repair.
Ghost Controls Models & Products We Service in Washington Park
We service the full Ghost Controls lineup you’re likely to see in Washington Park: the AXS Series (AXS1 and AXS2 solar swing-gate kits), the Titan Series (Titan12 and Titan24 dual-gate operators), the Heavy-Duty Single Swing Gate Opener kit, and the tubular arm and gate-mount bracket accessories. When a Ghost Controls OEM part is discontinued or back-ordered, we source compatible control boards, arms, batteries, and solar panels from quality suppliers and tell you plainly what the trade-off is. If your gate frame is rusted through, we’ll say so before selling a motor. We also handle battery backup installations for Washington Park and Roosevelt Gardens homeowners who want their Ghost Controls opener to keep working through the next hurricane-season outage.
Ghost Controls Service Pricing in Washington Park
Ghost Controls gate repair in Washington Park typically runs $150 to $450 depending on whether we’re replacing a battery, a control board, a gate-mount bracket, or a combination of parts. Service calls with diagnosis generally start around $75 to $125, and that amount applies toward the repair when you approve the work. We quote the full price and get your OK before any work begins, so you’re never surprised by an invoice larger than what we discussed. The final cost depends on which Ghost Controls model you have, the condition of the gate frame and posts, and whether we’re re-aligning settled hardware or just swapping a component. Call (833) 570-5807 for an exact quote. Estimates are free.
See the difference
Before
After
Before
After
Before
AfterServing Washington Park, FL — Our Local Coverage Area
We’re based in the Washington Park area and know this community well, and we also provide Ghost Controls in Broward Estates. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Ghost Controls Gate Repair in Washington Park
Water has most likely softened the soil around your gate post, letting the gate settle and bind against the driveway. The Ghost Controls control board senses resistance and reverses as a safety response. We fix this by re-anchoring or re-setting the post and re-aligning the arm so the opener isn’t fighting a sagging gate. Call (833) 570-5807 and we’ll diagnose it.
It depends on the gate’s weight, condition, and whether the hinges and posts still hold it in plumb. The AXS and Titan kits are rated for specific gate weights and lengths, but if your iron gate has settled or the hinges are rusted stiff, even a properly sized operator struggles. We assess the whole gate before recommending repair or a different setup.
South Florida humidity corrodes contacts and battery terminals inside keypads and remotes. We often find the issue isn’t the control board but water intrusion into the keypad housing or a corroded remote battery terminal. We’ll isolate whether it’s the remote, the keypad, or the receiver on the board so you only pay for what’s actually failing.
We replace Ghost Controls batteries, solar panels, control boards, arms, and brackets individually. Most Washington Park calls don’t need a full motor replacement. We trace the actual fault and swap only the failed part, using OEM or compatible components depending on availability and cost.
Usually it’s the gate. After heavy rain in Washington Park, we see latch posts that have shifted, hinges that have dropped, and gates that sit off-level. The Ghost Controls operator may be working fine. We’ll tell you which it is, and if it’s the gate hardware, we fix that rather than selling you a board or motor you don’t need. Call (833) 570-5807 for a straight answer.
About Miami Gate Company
Miami Gate Company handles gate repair, electric gate repair, and gate installation across residential and commercial properties throughout the Washington Park service area and beyond. We’re brand-agnostic, trained across at least nine gate and operator brands including LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. Gates are all we do, and that focus shows in how fast we diagnose a Ghost Controls board fault versus a post settlement problem. Whether you need a motor repair, a swing gate re-alignment, or a full installation, one call gets you a specialist who’s seen your exact failure mode before.
Service Areas Near Washington Park
Besides Washington Park, we provide Ghost Controls gate service in Lauderhill, Plantation, Hialeah, North Miami, and Allapattah. If you’re on the edge of the 33311 grid or a few blocks over, we still cover you.
Book Your Ghost Controls Service in Washington Park Today
If your Ghost Controls gate is sagging, reversing, or dead after a storm, call (833) 570-5807 now. We’ll send a gate specialist to your Washington Park home, diagnose what actually failed, and quote the fix before any work starts. Free estimates, and we respond fast to Washington Park service calls.
Written by Ruben Castellano, Owner at Miami Gate Company, serving Washington Park.