Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Sunrise, FL
Sunrise homeowners call us most often for Gate Installation, and the reason is usually the same: their original aluminum or steel gate from the 1980s or early 1990s has finally reached the end of its service life. Salt-laden humidity, hurricane wind cycles, and three decades of daily cycling leave hinges corroded, posts fatigued, and frames warped past the point where repair makes financial sense. Miami Gate Company handles the full replacement process in Sunrise, from permit-ready drawings to final automation setup, and we coordinate with HOA architectural review boards before any street-visible gate gets swapped. Call (833) 570-5807 for a free estimate on a new gate system built for South Florida conditions.
Why Sunrise Homes Are Different
Sunrise was built as a master-planned community, with most of the housing stock going up between 1970 and 1995. That means the city’s single-family homes and townhomes are now carrying original aluminum driveway gates, wrought-iron pool enclosures, and the automated operators that ran them, all of which are hitting end-of-life at roughly the same time. In Sawgrass and similar HOA-governed subdivisions, a gate repair or replacement isn’t just a mechanical job; it often needs to match the community’s original aluminum finish and style, and the work usually has to clear an architectural review board before anything visible from the street changes. We handle that coordination directly.
South Florida’s salt-laden humidity is brutal on steel gates. Surface rust spreads fast, especially at weld points and hinge barrels, and the same corrosion works into the electronics enclosures on automatic systems. Hurricane-season wind loads add another failure mode, stressing hinges, opener arms, and cantilever rollers well past their rated cycles. Repair work in Sunrise therefore leans on corrosion-resistant hardware, stainless fasteners, and wind-rated reinforcements as a default, not an upsell. The city also enforces building codes that treat gate work more like barrier construction than cosmetic fencing, so permits are often required even for like-for-like replacements, something we navigate as part of every quote.
Styles & brands we work with
Our Main Sunrise Services
Most calls from Sunrise fall into two buckets: a gate that won’t move or close properly, and an electric operator that has stopped responding to remotes, keypads, or safety sensors. Both live under the same roof at Miami Gate Company, but each has its own dedicated Sunrise page with deeper detail.
Gate Repair in Sunrise
Steel and aluminum gates in Sunrise fail in predictable ways: hinge barrels seize from corrosion, post brackets pull loose from concrete footings after decades of wind loading, and frames sag until the latch no longer lines up. We repair the gate itself at the component level, welding cracked joints, replacing corroded hardware, and re-hanging the leaf so it swings or slides without fight. In HOA communities like Sawgrass, we match the original finish so a repair doesn’t create a two-tone eyesore at the front of the property. For the full picture on our repair service here, see Gate Repair in Sunrise.
Electric Gate Repair in Sunrise
An automatic gate that won’t open is usually an electronics or power problem, not a gate problem. Our Sunrise electric gate calls center on dead control boards, fried loop detectors, misaligned photo eyes, and motors that have burned out after years of salt-air exposure. We diagnose down to the component level, and because we work on LiftMaster, FAAC, BFT, DoorKing, and other major platforms, we can often repair the existing system rather than replace it. For motor, board, sensor, and wiring specifics, visit Electric Gate Repair in Sunrise.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Gate Installation in Sunrise
A new gate in Sunrise is a measured, permitted, scheduled project, not a same-day swap. Most of the homes we work on were built between 1970 and 1995, which means the original gate is often a custom aluminum or steel fabrication with dimensions that don’t match today’s off-the-shelf panel sizes. Salt-laden humidity and hurricane wind loads mean the new system needs stainless or coated hardware from day one, and the operator should be sized for the gate’s wind profile, not just its weight. We install the gate, the automation, the safety edges, and the power run, and we stay the single point of contact through permit sign-off and HOA approval. That’s the full scope of our Gate Installation work in Sunrise, from first measurement to a gate that opens every time.
Automatic Gate Installation
Signs you need it
You’re ready for a gate that opens with a remote or code entry, whether you’re replacing a manual swing gate or building a driveway entrance for the first time.
What it costs in Sunrise
Automatic gate systems in Sunrise typically run from $3,500 to $9,000, with high-end commercial or custom configurations reaching $15,000+ depending on operator class and gate mass.
How we do it
We measure the opening, select an operator rated for the gate’s weight and wind load, set posts and pour footings per code, hang the gate, mount the operator, run power from the nearest circuit, install safety photo eyes and edge sensors, program remotes and keypads, and coordinate the permit inspection.
Driveway Gate Installation
Signs you need it
Your existing driveway gate is sagging, rusted through at the hinges, or no longer matches the scale of the home after a renovation, and repair would exceed replacement value.
What it costs in Sunrise
A new single driveway gate in Sunrise generally falls between $1,500 and $6,000, while a double-leaf or full driveway gate system with automation ranges from $4,000 to $12,000.
How we do it
We match fence height and setback to city code, review HOA finish requirements if the gate faces the street, fabricate or order the gate to the measured opening, set reinforced hinge posts, hang and level the leaves, and add automation only where the customer wants it.
What Gate Installation Costs in Sunrise
| Item | Typical range in Sunrise |
|---|---|
| Single driveway gate, installed | $1,500 – $6,000 |
| Automatic gate system with operator | $3,500 – $9,000 |
| Double-leaf or full driveway gate with automation | $4,000 – $12,000 |
Do you handle the HOA approval process in Sunrise?
Yes. For street-visible gates in communities like Sawgrass, we prepare the finish and style documentation your HOA’s architectural review board needs before installation begins, and we schedule the work around their approval timeline.
What does a full gate installation include in Sunrise?
It includes site measurement, post setting and concrete work, gate fabrication or ordering, hinge and latch hardware rated for salt exposure, operator mounting where requested, sensor installation, the power run, programming, and final permit inspection.
Brands We Service in Sunrise
We work on more brands than most gate companies in Sunrise see in a year, and that matters when a system doesn’t match the name on the control board. DoorKing and Elite show up constantly on Sunrise HOA entrances, while Ghost Controls and Mighty Mule are common on residential driveway gates from the last decade. We stock parts for all of them, which shortens turnaround on Sunrise repairs. See our brands for the full list.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Sunrise, FL
| Service | Typical range in Sunrise |
|---|---|
| Gate repair service call | $75 – $150 |
| Gate hinge replacement | $150 – $450 |
| Gate alignment and adjustment | $150 – $400 |
| Electric gate motor replacement | $600 – $1,800 |
| Control board replacement | $350 – $1,200 |
| Electric gate sensor replacement | $250 – $650 |
| Single driveway gate, installed | $1,500 – $6,000 |
| Automatic gate system with operator | $3,500 – $9,000 |
| Double-leaf or full driveway gate with automation | $4,000 – $12,000 |
In Sunrise, two local factors push prices toward the upper end of those ranges: corrosion from salt-laden humidity often requires replacing hardware that a drier-climate repair would keep, and HOA architectural review can add design and matching costs for street-visible gates. Whatever the job, we quote the full price and get your agreement before any work starts, so the invoice never surprises you.
Neighborhoods We Serve in Sunrise
We run calls and installations across all of Sunrise, from the original 1970s subdivisions to the newer townhome communities. The housing stock varies, but the gate problems stay consistent: corroded hardware, tired operators, and HOA requirements that need a specialist who has done this before.
- Sawgrass
- Sunrise Golf Village
- Welleby
- Sunrise Lakes
- Bonaventure
Response across Sunrise is typically same-visit or next-day for repair calls; installations are scheduled after measurement and are built around permit and HOA timelines.
Service Area – Cities Near Sunrise
Our service area extends beyond Sunrise into the surrounding Broward municipalities, and most of those gates face the same salt-air and HOA conditions we deal with here. We regularly work in Wilton Manors, FL, Boulevard Gardens, FL, Rock Island, FL, and Roosevelt Gardens, FL, where the same 30-to-50-year-old gate stock is reaching replacement age on the same schedule as Sunrise.
Serving Sunrise, FL — Our Local Coverage Area
We’re based in the Sunrise area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Sunrise
For repair calls in Sunrise, we generally arrive the same day or the next business day. Installations and replacements are scheduled around measurement, permitting, and any HOA review, so those timelines are set at the quote stage and confirmed before work begins.
In most cases, yes. Sunrise treats gate work as structural construction, and permits are often required even for like-for-like replacements, especially for automatic systems. We handle the permit paperwork as part of the installation, and we coordinate with your HOA’s architectural review board when the gate faces the street.
Yes. We service single-family driveway gates, townhome entry gates, and commercial systems for HOAs, condominium associations, and property managers throughout Sunrise. The same brand-agnostic diagnostic approach applies whether the gate is 10 feet wide or 40 feet wide.
What happens when you call
- 1A real person answersNo phone trees — talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Sunrise Customers Say
"Photo eye was misaligned so the gate refused to close after dark. Ten minute fix. He also cleaned the lens and pointed out that the sprinkler head was spraying it every morning, which is why it kept happening."
— Chris Norris"Control board fried after a lightning storm. He showed me the burn mark on it, quoted the board, and installed a surge protector on the line so it hopefully doesn't happen again."
— Alma Vargas"Gate works properly now and the price was fair. The one thing is that it took two visits, because the operator model we have is old and the part had to be ordered. They didn't charge for the second trip."
— Bethany Hayes