Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Repair Across Tice
Gate repair in Tice, FL typically costs $185 – $540 depending on the failure, and the most common calls we get involve posts that have worked loose in the sandy soil along Palm Beach Boulevard or operator boards fried by summer lightning. If your gate is dragging, binding, or dead, call (833) 570-5807 and we’ll send a technician who actually knows this part of Lee County. We work on residential driveway gates, farm and fence-line gates, and light-commercial frontage gates throughout 33916. This isn’t generic gate service: it’s repair work shaped by Tice’s specific soil, salt air, and unincorporated county rules.
Why Miami Gate Company Is Tice’s Preferred Gate Repair Team
Our Gate Repair team has worked on gates all over east Fort Myers, and Tice calls come with their own patterns. We know the chain-link drive gates on older mid-century lots off Palm Beach Boulevard. We know the welded steel farm gates whose hinge posts shift after every wet season. We know the small commercial gates along the Boulevard where a stuck gate means a business that can’t open at 7 a.m.
Ruben Castellano built this company around a simple idea: gates are all we do. No fencing jobs on the side, no garage door calls between appointments. That narrow focus means our technicians spend every working day diagnosing gate hardware, gate automation, and gate structural problems. When a Tice homeowner calls about a gate that suddenly drags, we don’t guess. We check the footing first, because that’s what Tice soil does to posts.
Homeowners, landlords, and property managers across Lee County call us because we run brand-agnostic. We fix what’s on the property rather than steering you toward a system you don’t need. That matters in Tice, where a lot of gates are decades old and openers are often basic models that still have years left in them with the right repair.
Styles & brands we work with
Gate Welding in Tice
Gate welding in Tice is usually repair welding rather than fabrication from scratch. We’re called when a hinge tears away from a steel frame, when a picket snaps at the rail, or when a slide gate’s rack has pulled loose from the beam. The salt air and afternoon thunderstorms that roll through this part of Lee County are why a 20-year-old welded steel gate on a Palm Beach Boulevard frontage can suddenly crack at the joint: rust builds inside the seam, weakens the weld, and one good storm gust finishes the job.
Structural Weld Repairs
Most structural weld repairs in Tice involve rewelding hinge plates, bottom rails, and corner joints after years of corrosion plus the constant flex of a gate that’s been slightly out of alignment. We grind back to clean steel, weld, and then coat properly so the repair doesn’t become the next rust point.
Rack and Track Welding
Slide gates in Tice often use bolt-on rack that eventually rips its welds or stretches its bolt holes. We weld the rack back to the beam, realign the drive sprocket, and check that the gate hasn’t sagged enough to bind. A typical gate welding repair in Tice runs $220 – $480, with the full replacement of a badly rotted frame section quoted before any work starts.
Commercial Gate Repair in Tice
Commercial gate repair in Tice covers the light-industrial and small-business frontage gates along Palm Beach Boulevard, plus gated storage yards, small agricultural operations, and rental properties with shared entrances. These are mostly slide gates or heavy swing gates with operators that see high daily cycle counts. When a commercial gate goes down, it usually means lost business, blocked deliveries, or a tenant who can’t get in. We quote the repair price and agree on it before any work begins, so a fleet yard or mini-storage operator isn’t surprised by the invoice.
Heavy Slide Gate Systems
Heavy slide gate systems fail most often at the rollers and the rack. In Tice, sandy soil gets into roller bearings and wears them out faster than on paved commercial lots elsewhere. We replace rollers, rebuild v-track or rail sections, and reset the motor torque so the operator isn’t fighting the extra drag.
Commercial Operator Diagnostics
We carry parts and compatibility knowledge for LiftMaster, FAAC, BFT, and Linear operators, and we fix many DoorKing and Elite systems that other callers gave up on. Commercial operator repair in Tice typically runs $310 – $740 including board replacement where needed. It’s more than a residential call because commercial boards, mag-locks, and safety loops cost more and the operator often needs to be reprogrammed after the repair.
Trusted Brands We Service in Tice
We’re trained across the major gate operator and hardware platforms, not married to one manufacturer. That means we fix Ghost Controls kits on rural Tice driveways, Mighty Mule openers on small farm gates, and DoorKing and Elite systems on commercial frontage. We keep common boards, remotes, photo-eyes, and safety edge parts in the van, so a basic operator repair in Tice is often done in one visit. Brand-agnostic means the diagnosis drives the fix, not the sales incentive. If your existing system can be repaired safely, we repair it.
See the difference
Before
After
Before
After
Before
AfterCommon Gate Repair Problems We See in Tice Homes
- Posts that shift in sandy soil. Tice’s sandy-loam soil doesn’t hold concrete footings the way clay does. After a heavy summer rain, the soil around a post goes soft, the post leans, and a gate that swung fine for years suddenly drags on the latch side or binds mid-swing. Fixing this usually means resetting or replacing the footing rather than adjusting hinges.
- Operator death by lightning. Afternoon thunderstorms across southern Lee County bring lightning surges that travel through the low-voltage wiring and completely fry control boards and photo-eye sensors. Gate opens by hand but won’t move when the remote is pressed. We replace boards, sensors, and wiring as needed.
- Rusted and seized hardware on chain-link and painted steel gates. Tice’s humidity plus brackish air from the Caloosahatchee corridor accelerates corrosion. Hinges seize, latches jam, and gate posts rust through at the base. We swap to stainless fixings wherever practical.
- Gates that won’t close fully or reverse without reason. This is often a misaligned photo-eye, a broken safety loop, or a control board that’s lost its limits. We test the entrapment protection first, then run the limits and force settings. Safety edges and photo-eyes must be checking clear before we finish.
Pricing for Gate Repair in Tice, FL
Gate repair in Tice runs from about $185 for a hinge and latch replacement on a modest chain-link gate, up to $540+ for a full slide-gate roller rebuild or commercial operator board swap. Post resetting in failed sandy-soil footings typically runs $260 – $480 depending on the post size and how much concrete is needed. Wireless keypad and receiver replacements run $95 – $190. These ranges reflect Tice’s older gate stock and the need for corrosion-resistant hardware upgrades. Every job gets a written price before work starts, and estimates are free. Call (833) 570-5807 to book a service visit.
We also repair gate weld failures, realign triple-lock and gravity latches, replace broken pickets, and reset operators that have lost their travel limits. If a gate is structurally compromised beyond repair, we’ll tell you straight and quote a replacement as a separate option. No pressure, no upsell.
We Also Serve Cities Near Tice
Our Gate Repair in Tice coverage reaches the same technicians who serve Lochmoor Waterway Estates, North Fort Myers, Buckingham, and Fort Myers Shores. If your gate is just over the county line or a few miles up Palm Beach Boulevard, the pricing and response are the same. Call us and you’ll talk to someone who knows Lee County gate work, not a call center in another state.
Serving Tice, FL — Our Local Coverage Area
We’re based in the Tice area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Tice
Because in Tice the problem is usually the post footing, not the hinge. The sandy-loam soil around the hinge post softens after every wet season, the post leans, and the gate sags again in months even with new heavy-duty hinges. The proper fix is to reset or replace the post footing, then align the gate to the latch and hinge points. Call (833) 570-5807 and we’ll check the post before we sell you more hinges.
In Lee County, an automatic gate must have working entrapment protection: either photo-eyes, a reversing sensor in the operator, contact edges, or a combination appropriate to the gate type and duty. If your gate reverses on its own or refuses to close fully, it may have lost one of these safety devices or its limits. We test the sensors and safety loop on every Tice service call. Don’t run an opener without entrapment protection, especially with kids or pets nearby.
It’s almost certainly the control board or the photo-eye sensors, both of which are sensitive to the lightning surges that accompany Tice’s summer afternoon storms. A direct hit isn’t required; nearby strikes induce enough voltage on low-voltage wiring to kill boards. We replace the damaged board, check the transformer and wiring, and only then test the opener. If your operator is on the older side, we’ll tell you whether a board replacement makes sense or if you’re better off with a new LiftMaster or Linear unit.
For most repair work, no. Tice is unincorporated Lee County, and repairs like replacing hinges, welding a broken rail, or swapping an operator typically don’t require a permit. But if we’re moving a gate line, changing the fence height along Palm Beach Boulevard frontage, or adding an opener to a gate that never had one, county setback and fence-height questions can apply. We handle the verification before work starts, and if a permit is needed we’ll tell you upfront. Call (833) 570-5807 to talk through your specific gate.
The most effective step is to switch hinge and latch hardware to stainless, which doesn’t rust like the zinc-plated hardware most chain-link gates came with 30 years ago. For the frame and fabric, a proper wire-brush prep followed by a rust-inhibiting primer and zinc-rich topcoat buys years. In Tice, galvanized posts can also rust at the concrete line, so coating the bottom 12 inches of each post before it’s set is one of the single best long-term upgrades. We can do this during any post reset we perform in Tice.
Written by Ruben Castellano, Owner at Miami Gate Company, serving Tice and Lee County.
Call (833) 570-5807 for a free gate repair estimate in Tice. We answer, we show up, and the price is agreed before we start.