Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Repair Across Pompano Beach
Gate repair in Pompano Beach usually comes down to two very different jobs. Near the Intracoastal and beach in 33062 and 33060, salt air corrodes hinges, operators, and wiring until gates seize or swing crooked. Inland HOA subdivisions in 33064 through 33069 fail differently, with binding tracks, mismatched replacement parts, and architectural approval paperwork driving the call. Our Gate Repair team handles both sides of the city, and we quote every job before work starts. Call (833) 570-5807 for a free estimate.
Why Miami Gate Company Is Pompano Beach’s Preferred Gate Repair Company
Ruben Castellano built Miami Gate Company around a simple idea: gates are all we do. That focus means our technicians know LiftMaster boards, FAAC limit switches, DoorKing loop detectors, and Mighty Mule solar controllers without stopping to look anything up. We work on virtually any gate system, whatever brand you have, we know it. For Pompano Beach customers, that translates to faster diagnosis and fewer return trips.
Our reputation in Pompano Beach comes from showing up ready. Homeowners off Southeast 15th Street and Atlantic Boulevard, property managers in the gated communities off Sample Road, HOA board members in Pompano Isles, we have serviced them all. We understand that a broken gate at a canal-front home is a different problem than a binding slide gate at a 200-unit HOA entrance. The salt air near Lighthouse Point bends hinge posts like clockwork. The inland communities need matching profiles and board approval documents. We plan for both before we arrive.
Styles & brands we work with
Gate Welding in Pompano Beach
Gate welding in Pompano Beach typically runs $150 to $450 depending on the size of the repair and whether we are working on aluminum or steel. A sagging driveway gate with a cracked weld at the hinge is usually on the lower end. A canal-front gate with a corroded post that needs cutting, refitting, and a new stainless hinge plate will land higher. We quote the exact number before any work begins.
Weld Repair and Reinforcement
Aluminum driveway gates from the 1970s crack at the corners where the top rail meets the hinge stile. Steel gates rust through at the bottom rail. We TIG weld aluminum and MIG weld steel, then grind and finish to match. On coastal properties, we recommend stainless reinforcement plates at every weld point because the salt air will find the weak spot again.
Post-to-Gate Structural Work
When a gate post rots or the concrete footing cracks, welding alone will not save it. We reset posts, pour new footings, and realign the gate so the operator does not strain. In Pompano Beach, we also check hurricane anchors. Older posts without wind-rated anchoring pull loose after a storm, and that is exactly when the gate starts dragging.
Commercial Gate Repair in Pompano Beach
Commercial gate repair in Pompano Beach covers slide gates, swing gates, barrier arms, and shared entry systems at HOAs, condo associations, and business properties. Repairs generally run $200 to $700 depending on the component. A failed loop detector or a burned control board sits at the low end. A full operator replacement with wiring and safety sensor testing costs more. We always quote the job in writing before starting.
Shared Entry and Resident Access Systems
Gated communities in Pompano Beach rely on access systems that everyone uses but no one thinks about until they stop working. We repair keypads, telephone entry systems, vehicle loop detectors, and remote receivers. When a board member tells us the gate will not close because a loop is dead, we find it, splice it, and retest the full safety cycle. The gate has to stop and reverse correctly or it creates a liability.
HOA and Property Management Coordination
We work directly with property managers and HOA boards. That means submitting the proposal, getting architectural approval, scheduling work around resident access hours, and providing documentation for the board file. For communities that enforce matching gate styles, we keep the original profile intact. No mismatched panels, no surprise violations.
Trusted Brands We Service in Pompano Beach
We service LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule, so whatever operator your Pompano Beach property has, we know it. Ghost Controls and Mighty Mule kits are common on residential solar gates in inland HOA subdivisions. DoorKing and Elite run most commercial slide gates and barrier arms. We stock common boards, sensors, remotes, and safety edges for these brands, which means we are not waiting on a distributor to diagnose your system.
See the difference
Before
After
Before
After
Before
AfterCommon Gate Repair Problems We See in Pompano Beach Homes
- Seized hinges on canal-front properties. Salt-laden air off the Intracoastal turns steel hinges into rust in two or three years. We replace them with stainless hardware and set up an annual lubrication schedule so the gate does not bind again.
- Mismatched replacement panels in HOA communities. Inland subdivisions in 33064 through 33069 enforce matching profiles. We fabricate or source panels that match the original style and finish, so the board never flags the work.
- Operator misalignment after storm winds. June through November, wind loads push gates out of plumb and the operator strains or strips. We check the anchors and footings, not just the motor, because the motor is usually a symptom.
- Dead safety edges and loop detectors on shared gates. Commercial systems in Pompano Beach see daily cycles that most residential gates never do. Safety components fail first, and when they do, the gate will not close or will not auto-reverse. We test the full safety circuit on every call.
Pricing for Gate Repair in Pompano Beach, FL
Most residential gate repairs in Pompano Beach run $150 to $450. Hinge replacement on a single-family driveway gate starts around $150. A full operator swap on a slide gate lands between $400 and $700. Commercial repairs with access control components run $200 to $700. What drives the final number is the gate’s condition, the brand of operator, and whether coastal corrosion has spread beyond the obvious part. We give the total price before work starts, and the number you agree to is the number you pay. Call (833) 570-5807 for a free estimate.
We Also Serve Cities Near Pompano Beach
Our Gate Repair in Pompano Beach service area covers the neighborhoods from the Intracoastal to the Sawgrass, and we also run crews to Coconut Creek, Margate, Kendall Green, and Lighthouse Point. If your community sits just over the line, call us and we will tell you straight whether we can get there this week.
Serving Pompano Beach, FL — Our Local Coverage Area
We’re based in the Pompano Beach area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Pompano Beach
We need a copy of the architectural guidelines and the approval form, if the board has one. We match the original gate style, height, finish, and operator housing so the repair passes review. In our experience, most Pompano Beach HOAs approve work quickly when the submission shows the original profile is preserved and no mismatched panels or hardware are proposed. We can provide a written scope of work with materials and finish specifications for your board file. Call (833) 570-5807 and we will walk you through it.
Salt spray from the Intracoastal and beach settles on metal and starts corrosion within months. Steel hinges and hardware on the ocean-facing side can seize or fail within two to five years, while the same hardware a mile inland in 33065 might last a decade. The fix is stainless steel hinges, posts, and fasteners, plus a simple lubrication schedule we set up for you. On canal-front gates, we also check the post footing because salt moisture attacks concrete anchors too.
Yes, we service the full shared entry stack: slide and swing gate operators, loop detectors, keypads, telephone entry, remote receivers, and safety edges. We work with property managers and HOA boards in Pompano Beach, and we schedule around resident access hours. We also provide written documentation after the job so the board has a record for the community file.
We check the gate’s alignment and the post anchors first, because wind load bends gates and moves posts before it kills motors. In Pompano Beach, most post-storm failures are mechanical: a shifted post, a sagging hinge, or a bent track. Once the gate is straight and the anchors hold, we power the operator and test the limit switches, safety loop, and photo eyes. The motor is usually the last thing we touch, not the first. Call (833) 570-5807 for an exact quote and free estimate.
Yes. Ghost Controls, Mighty Mule, and other solar gate openers are common on the swing gates in Pompano Beach’s inland HOA subdivisions, and we repair the full system: the motor, control board, battery, solar panel wiring, and remote receiver. Solar systems fail differently than AC operators because the battery degrades and the panel charge drops, especially after cloudy stretches. We diagnose the whole power path and replace only what is actually dead. Estimates are free.
Written by Ruben Castellano, Owner at Miami Gate Company, serving Pompano Beach and surrounding communities.