Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Repair Across Plantation
Gate repair in Plantation usually runs $185 – $520 for hinge and post work, $90 – $240 for latch and lock fixes, and $260 – $680 for electric operator or control board repairs. We get to most Plantation neighborhoods the same day or next morning, with parts loaded for the brands we know are common here. Call (833) 570-5807 for a free estimate. We work on whatever gate you already have, not the one we’d rather sell you.
Plantation isn’t like most South Florida cities. It’s a web of gated communities and country-club subdivisions, many built in the 1960s and 70s, where driveway gates and pool gates have been running for decades. That means we see the same issues repeat across Jacaranda, Plantation Acres, and inside communities like Hawks Landing: corroded hinge posts, control boards that no manufacturer supports, and gates that sag because the footing underneath gave out years ago. We know these neighborhoods. We know what fails here and why.
Why Miami Gate Company Is Plantation’s Preferred Gate Repair Company
We’re a gate-only shop. Every technician Ruben Castellano sends to Plantation works on gates all day, every day, not fences in the morning and gates after lunch. That focus changes how fast we diagnose a problem. A sagging decorative iron gate in a 1970s ranch? We check the hinge post footing first, because we’ve seen it a hundred times. An old DoorKing or Elite operator that won’t respond? We open the board enclosure and look for the specific failure points salt air creates here.
Plantation customers call us because the first repair actually holds. We don’t patch a symptom. If a post footing is rotted or the control board can’t accept a modern safety photocell, we say so plainly and give you the retrofit cost against the replacement cost. Ruben built the company on that kind of honesty, and it’s why our Plantation work comes mostly from referrals now. Your neighbor in Jacaranda called us. Their property manager called us. You can too: (833) 570-5807.
We also understand the layer most repair companies ignore: Plantation’s HOAs and architectural review boards. When a gate sits at a community entrance, it’s not just a mechanical job. There are ARC forms, property management timelines, and a standard we have to meet. We’ve coordinated those approvals before. It doesn’t slow us down because we know what they ask for.
Styles & brands we work with
Metal Gate Repair in Plantation
Metal Gate Repair in Plantation most often comes down to three things: corroded hinges, failed post footings, and panels that have twisted out of alignment. The salt-laden air here gets into every unsealed joint and every screw hole. Aluminum gates hide corrosion well until a hinge shears. Wrought-iron gates rust from the inside at the post base, where sprinkler water and humidity sit. We repair all of it, and we use salt-resistant hardware so the fix lasts beyond the next wet season. Count on $185 – $520 for typical hinge, post, or panel repair, with the final number agreed before we start.
Hinge and Post Replacement
A Plantation gate that drags on the ground usually isn’t a panel problem. It’s a hinge post that has shifted or rotted in the footing. We reset the footing, square the post, and re-hang the gate so it swings true. If the post is gone, we replace it and match the surrounding fence or wall so the ARC doesn’t flag it.
Gate Realignment and Sag Correction
Sag correction alone fails if the post is the root cause. We fix both in one visit. We also add gusset reinforcement on wide driveway gates, which cuts the racking that Plantation’s afternoon storms put on a gate every summer.
Wood Gate Repair in Plantation
Wood Gate Repair in Plantation usually means one of two scenarios: a decorative wood gate on an older ranch home that has weathered and split, or a wooden frame gate on a pool deck that has gone soft at the hinges. Humidity and termite pressure are relentless here. We replace rotted stiles, re-hang the gate on heavier-duty hinges, and treat or paint the repair to match. Budget $160 – $410 for most wood gate repairs in Plantation, quoted upfront before any work begins.
Frame and Stile Replacement
The stiles rot first, especially where the hinge screws bite into end grain. We pull the gate, cut out the rotted sections, and splice in pressure-treated or cedar replacements. The gate goes back square and closes without dragging.
Pool Gate Latch and Barrier Compliance
Wood pool gates fail inspection when the self-closing spring weakens or the latch no longer self-latches. Florida’s residential pool barrier code doesn’t care how the gate looks. It has to close and latch on its own. We spec hardware that passes the first time.
Trusted Brands We Service in Plantation
We service Ghost Controls, DoorKing, Elite, and Mighty Mule systems across Plantation, along with LiftMaster, FAAC, BFT, Linear, and Viking. That’s nine major gate and operator brands, and it matters when your system is 20 years old and the original installer is gone. We carry common boards, remotes, and safety sensors for these brands in our trucks, so we’re not waiting on a distributor to ship a part for your gate. Brand-agnostic means we fix what you have. Our Gate Repair team knows each of these systems at the component level, not just the marketing level.
See the difference
Before
After
Before
After
Before
AfterCommon Gate Repair Problems We See in Plantation Homes
- Obsolete control boards on legacy gated-community entry operators. Older DoorKing and Elite boards often can’t accept the safety photocells required today, so we retrofit or swap the operator on a schedule that won’t strand the community entrance.
- Salt-corrosion at the hinge post base. Decorative aluminum and wrought-iron drive gates look fine from the street but rot at the footing. Replacing the hinge alone is wasted money. We address the post first.
- Pool gates that no longer self-close or self-latch. A worn latch in a Jacaranda backyard can trigger a code-compliance failure. We install self-closing, self-latching hardware that inspectors accept without a return visit.
- Hurricane-season wind stress on wide driveway gates. Double gates rack and twist when the wind catches them. We add reinforcement and, when needed, a wind-rated operator that holds the gate instead of fighting it.
Pricing for Gate Repair in Plantation, FL
Most Plantation gate repairs land between $185 and $520. The lower end covers latch replacement, hinge repair, and minor gate realignment on a ranch home or townhouse. The upper end covers post footing resets, full panel re-hangs, and electric operator repairs on larger driveway or community entrance gates. Electric gate repair runs higher, $260 – $680, because it usually involves a control board or motor. Rust repair and welding falls in the $140 – $380 range. Every job gets a written quote before work starts, and the price you approve is the price you pay. Call (833) 570-5807 and describe what your gate is doing. Estimates are free.
| Repair Type | Typical Plantation Price Range |
|---|---|
| Latch and lock repair | $90 – $240 |
| Hinge and post repair | $185 – $520 |
| Wood gate frame or stile repair | $160 – $410 |
| Electric operator / control board | $260 – $680 |
| Rust repair and welding | $140 – $380 |
| Pool gate barrier compliance fix | $110 – $280 |
We Also Serve Cities Near Plantation
Our service area runs west from Fort Lauderdale through Broadview Park and Broward Estates, and up into Lauderhill. If you’re in any of those neighborhoods with a gate that won’t close or an operator that quit, we’ll come out the same way we do for Plantation customers. Gate Repair in Plantation is our core, but the surrounding cities get the same trucks, the same techs, and the same straight answers.
Serving Plantation, FL — Our Local Coverage Area
We’re based in the Plantation area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Plantation
Yes. We’re familiar with Plantation’s ARC process and the documentation HOAs ask for before a gate gets repaired or replaced. We can provide materials, finishes, and drawings the board needs, and we’ll coordinate with property management so the repair doesn’t stall. Call (833) 570-5807 and tell us which community you’re in; we’ve likely worked there before.
The panel is rarely the problem. In Plantation’s older subdivisions, the hinge post footing has usually rotted or shifted, so the post leans and every panel you hang on it sags again within a year. We reset the footing and re-hang the gate from a solid post. Until the post is fixed, sag correction is just cosmetic.
Not always, but the gate itself has to meet Florida’s residential pool barrier code, and inspectors can check it when other pool work is being inspected. The replacement latch must be self-closing and self-latching. We install code-compliant hardware as standard on every Plantation pool gate we touch, so there’s no second trip and no failed inspection. Call (833) 570-5807 for a free estimate.
Sometimes the board can be retrofitted with a newer revision or an external safety module. But many legacy boards from the 1990s and early 2000s don’t accept current entrapment-protection photocells, and no retrofit kit exists for them. When that’s the case, a new operator is genuinely cheaper than chasing obsolete parts. We’ll show you the numbers for both paths and let you decide.
We reinforce wide gates with gussets and heavier post footings, and we recommend wind-rated operators for double driveway gates that get full exposure. The goal is a gate that doesn’t rack in a storm, and an operator that holds the gate instead of fighting the wind. It’s one of the differences between a gate that survives a season and one that’s leaning by September.
Written by Ruben Castellano, Owner at Miami Gate Company, serving Plantation and surrounding South Florida communities with gate-only repair and installation expertise.