Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Repair Across Micco
Gate repair in Micco usually costs between $185 and $700 for typical fixes, with heavy ornamental and custom work running higher. Most jobs around here take one visit, but salt-corrosion work on lagoon-front properties sometimes needs a second trip for hardware that has to be ordered. Call (833) 570-5807 and we’ll give you a straight price before any work starts.
Micco isn’t a suburb. It’s a stretched-out, unincorporated Brevard County community where homes sit on big lots along SR-510, down sandy side roads, and right up against the Indian River Lagoon. We know the drive out here, we know the gates people have, and we know what the salt air does to them. When you call, you’ll talk to someone who understands that a gate post leaning after wet season isn’t a mystery. It’s the water table.
Why Miami Gate Company Is Micco’s Preferred Gate Repair Company
We’re Gate Repair specialists, not a fence crew that occasionally touches a hinge. Every technician who rolls into Micco works on gates all day, every day. That focus matters when you’ve got a custom ornamental gate that took six months to fabricate and now sags two inches at the latch side.
Ruben Castellano built this company around one idea: diagnose the actual problem, fix it right, and don’t sell something the customer doesn’t need. We service LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. If you have an operator we don’t recognize by sight, we’ll still know what to do. Brand-agnostic means we fix what you have.
Micco homeowners call us because word gets around when someone actually re-plumbs a post instead of just shimming the hinge and hoping. We’ve repaired gates off Micco Road, along the river, and back on the unpaved lots where the manufactured homes sit. The work is different out here and we treat it that way.
Styles & brands we work with
Wood Gate Repair in Micco
Wood Gate Repair in Micco means dealing with a different set of problems than you’d see inland. The humidity and salt air swell the wood, the wet season soaks the posts, and the hardware rusts faster than the wood rots. Most wooden gates out here are owner-built or older custom work, which means we’re often re-hanging a heavy gate on a post that has shifted in sandy soil.
Re-hanging and Post Resetting
A wood gate that drags or won’t latch has usually pulled its hinges out of a post that has moved. We re-plumb the post to true vertical, reset it in concrete where needed, and switch hinge hardware to stainless so it doesn’t rust shut within two years. This is the most common wood gate repair we do in Micco.
Rot Repair and Hardware Replacement
Bottom rails rot from standing water, and the salt air eats standard galvanized hinges surprisingly fast. We cut out rotted sections, sister in new wood, and replace every piece of hardware with stainless or coated steel. A typical wood gate repair in Micco runs $220 to $600 depending on the size of the gate and how much structure has gone soft.
Driveway Gate Repair in Micco
Driveway Gate Repair in Micco usually starts with a gate that has stopped opening, drifts off its track, or grinds when it moves. The properties along SR-510 and back off Micco Road are spread out enough that a broken driveway gate can mean leaving your property open for days if you can’t get someone out. We get to Micco fast because we’re always working this stretch of Brevard.
Sag Correction for Heavy Gates
Steel and aluminum driveway gates sag when the hinge post leans or the hinge bushings wear out. On a 16-foot ornamental gate, a half-inch at the post becomes three inches at the latch. We correct the geometry, replace worn pins and bushings, and sometimes add a steel stiffener or an anti-sag kit if the frame was underbuilt for the wind loads. This type of repair in Micco typically runs $350 to $900 depending on gate weight and post condition.
Operator and Track Repair
When the gate opens halfway and stops, or the chain jumps, or the motor hums but nothing moves, the problem is usually in the operator, the track, or the limit switch. We diagnose at the component level, which means we fix the board or the sensor rather than swapping the whole unit. That saves money, and it’s how we like to work.
Trusted Brands We Service in Micco
We carry parts and know the failure patterns for Ghost Controls, DoorKing, Elite, and Mighty Mule, among others. Since Micco is a drive from any parts counter, we stock the common boards, sensors, hinges, and hardware that these systems need so we aren’t telling you to wait a week for a part. When your operator gives out, we can usually get it running the same day we diagnose it.
Common Gate Repair Problems We See in Micco Homes
- Salt-air hinge and opener seizure. Galvanized hinges and opener arms on lagoon-front gates corrode within a few seasons, then the gate binds and the operator burns out trying to move it. We replace with stainless hardware so it doesn’t happen again in two years.
- Posts leaning after wet season. Sandy, high-water-table soils along the SR-510 corridor shift when the rains come. Gate posts lean, gates sag, latches stop aligning. This needs a re-plumb, not a hinge adjustment.
- Storm-bent chain-link and aluminum gates. Hurricane-season wind loads and flying debris bend lighter gates and strip hardware. We straighten frames, re-tension wire, and replace damaged hinge brackets.
- Owner-built gates with aging hardware. Many Micco properties have gates built decades ago with whatever was handy. Manual latches freeze, weld joints crack, and openers get added later without proper reinforcement. We repair the whole thing so it works as one system.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Repair in Micco, FL
Expect these ranges in Micco right now: hinge and latch repair, $185 to $350. Post re-plumbing, $300 to $600 per post. Sag correction on a heavy driveway gate, $350 to $900. Operator board or sensor replacement, $250 to $700. Custom ornamental gate restoration, $600 to $2,500 depending on fabrication work. Weather exposure and how long the gate has been corroding will swing the final number.
Every job gets a written price before we touch your gate. You approve the number, we do the work, and the invoice matches the quote. Call (833) 570-5807 for a free estimate, and we’ll walk you through what your specific gate needs.
We Also Serve Cities Near Micco
Our gate repair crews cover the whole stretch of south Brevard. If you’re in Gate Repair in Micco or nearby, we also work in Roseland, Sebastian, Grant-Valkaria, and Malabar. Most of those are quick drives for us since we’re already working the river corridor.
Serving Micco, FL — Our Local Coverage Area
We’re based in the Micco area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Micco
Every 12 months is the right interval for an operator within salt-spray range of the lagoon. Coastal air corrodes boards, connections, and mechanical parts faster than inland. Annual service catches corrosion before it kills the operator and costs you a full replacement. Call (833) 570-5807 to schedule an inspection before the wet season.
The sandy, high-water-table soils around Micco lose bearing capacity when saturated, so posts set shallow or without enough concrete slowly lean. The fix is re-setting the post deeper with proper concrete and drainage, not just pushing it back. We re-plumb posts all over the SR-510 corridor every year.
Yes, we repair the gate structure, the operator, and the access system together. Heavy ornamental gates need the mechanical work done right before the electronics will function reliably. We’ve done this recently at a riverfront home off Micco Road, where we re-plumbed a settled hinge post, replaced corroded hardware, and installed a new LiftMaster operator with photocells and keypad entry.
We re-plumb the hinge post, replace worn bushings or hinges, and correct the gate’s alignment so it swings or slides without dragging. On heavier gates we may add a structural stiffener. A sagged gate left alone will destroy its own operator and hardware, so correcting it early is cheaper. Estimates are free, call (833) 570-5807.
Yes, every automatic gate needs working safety photocells and force settings that stop and reverse if something is in the way. This is a safety requirement, not an option. We test, align, and replace photocells on every automatic gate we repair in Micco.
Contact Miami Gate Company for Gate Repair in Micco
If your gate is sagging, seized, or dead, call (833) 570-5807 for a free estimate. We’ll diagnose the real problem, give you an honest price, and fix it right. Gates are all we do, and in Micco that makes all the difference.
Written by Ruben Castellano, Owner at Miami Gate Company, serving Micco and south Brevard County.