Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Repair Across Lauderdale Lakes
Gate repair in Lauderdale Lakes usually means one of two things: a swing gate that’s started dragging on its hinges, or an electric operator that’s stopped responding. We handle both, and we get to Lauderdale Lakes quickly from our Miami base. If your driveway gate won’t open, a pool gate won’t latch, or a condo gate operator is throwing error codes, call (833) 570-5807 and we’ll diagnose it properly.
Lauderdale Lakes is a built-out 1960s and 70s suburb, and that matters more than most people realize. Nearly every gate we service here is older than the person calling us about it. Original steel posts, original aluminum panels, original operator boards fighting salt air and humidity. We know which failures are worth repairing and which ones need replacement components, and we’ll tell you straight.
Why Miami Gate Company Is Lauderdale Lakes’s Preferred Gate Repair Company
Gates are all we do. That focus means our technicians have seen virtually every failure mode a Lauderdale Lakes gate can throw at them, from corroded hinge posts on Oriole Estates ranch homes to operator board failures at condo complexes along the 441/SR-7 corridor. We don’t split our attention across fencing, garage doors, or other trades. A gate specialist shows up, and the diagnosis is faster for it.
We work on virtually any gate system, whatever brand you have. Electric gate repair is a core competency here, not an add-on. We trace the motor, the control board, the safety sensors, the loops, and the wiring. Most handymen will swap a battery and call it done. We find the actual fault.
Local reviews from Lauderdale Lakes customers consistently mention the same things: we show up when we say we will, we explain the failure in plain English, and we quote the price before any work starts. Our Gate Repair team has built its reputation in Broward County one hinge post at a time, and Lauderdale Lakes is a big part of that.
Ruben Castellano leads our service team. When you call Miami Gate Company, you’re getting a gate specialist who has worked on LiftMaster, FAAC, BFT, DoorKing, Ghost Controls, Elite, Linear, Viking, and Mighty Mule systems. That brand-agnostic approach matters. We recommend what your existing system needs, not what a single manufacturer incentivizes.
Styles & brands we work with





Wood Gate Repair in Lauderdale Lakes
Wood Gate Repair in Lauderdale Lakes is mostly about keeping older wooden driveway and pool gates from self-destructing in this climate. A wood gate here faces two enemies: the humidity that swells the boards and rots the bottom rail, and the salt-laden air that eats every steel bracket, hinge, and screw that holds the frame together. We rebuild the structure, replace rotted rails, reset hinges, and treat the wood so it can survive a few more wet seasons.
Most Lauderdale Lakes homeowners call us when a wood gate starts sagging or the latch stops lining up. Short driveways on the 1960s ranch homes mean a wood gate takes a lot of wind load during afternoon thunderstorms. Over time, the frame twists, the screws strip, and the whole panel leans until it won’t close. A typical wood gate repair in Lauderdale Lakes runs $180 to $450 depending on how much of the frame needs rebuilding.
Replacing Rotted Bottom Rails
The bottom rail is the first thing to go on a wood gate in Lauderdale Lakes. It sits close to the ground, catches splash from afternoon downpours, and never fully dries because the humidity never drops. We cut out the rot, splice in pressure-treated lumber or a composite alternative, and re-hang the panel. On most gates this is a same-visit repair.
Re-Hanging and Re-Latching After Storm Damage
Wind from a tropical storm or a strong summer squall will rack a wooden gate out of square fast, especially on tight lots where there’s no room for a windbreak. We square the frame, reset the hinges, and adjust the latch so it actually catches. If the gate is held by steel posts that have started corroding at the base, we address that too, because a fresh gate on a failing post will sag again within a year.
Driveway Gate Repair in Lauderdale Lakes
Driveway Gate Repair in Lauderdale Lakes is our most common call, and it’s almost always an aluminum swing gate on a short driveway that’s started dragging, binding, or refusing to open. These gates are usually original to the 1960s and 70s homes and condo associations, which means the panels are still sound but the posts, hinges, and hardware are not. We repair the gate at the component level: new posts, new hinges, new operator arms, new boards, whatever the system actually needs.
Aluminum driveway gates in Lauderdale Lakes fail in a specific sequence. Salt air attacks the steel hinge post at the ground line first. The post corrodes, the gate sags, and then the operator gets blamed because it’s the part that’s visibly struggling. But replace the post and the gate levels back out. A typical driveway gate repair in Lauderdale Lakes runs $250 to $700, depending on whether it’s just hardware or a full post replacement plus operator resetting.
Post Replacement and Gate Realignment
When a driveway gate starts scraping the concrete or swinging loose on its hinges, the post is usually the problem, not the panel. We cut out the old steel post, set a new one in concrete, and re-hang the gate with stainless hinges and fixings that actually hold up to coastal air. This is the repair that makes the difference between a gate that works for another year and one that works for another twenty.
Operator and Limit Switch Repairs
Electric driveway gates in Lauderdale Lakes often need the operator recalibrated after a storm throws the gate out of alignment. We reset rack and pinion tracking, adjust limit switches, and check the safety edges and photo eyes so the gate opens fully and reverses when it should. If the board has failed, we source the correct replacement for the brand you own instead of pushing a full system swap.
Trusted Brands We Service in Lauderdale Lakes
We service and repair gate operators from nine major brands, including LiftMaster, FAAC, BFT, DoorKing, Ghost Controls, Elite, and Mighty Mule. That matters in Lauderdale Lakes because this area has such a mix of hardware: older DoorKing and FAAC units at condo communities, LiftMaster residential operators on single-family homes, and a fair number of Mighty Mule and Ghost Controls units on newer installations. We know the failure points on all of them. We keep common boards, remotes, and safety sensors stocked, and for Lauderdale Lakes customers that usually means a faster turnaround on repairs.
See the difference
Before
After
Before
After
Before
AfterCommon Gate Repair Problems We See in Lauderdale Lakes Homes
- Hinge posts corroded at the ground line. Salt air from the Atlantic blows inland and settles on every piece of steel in Lauderdale Lakes. The post rots at the footing long before the hinge itself fails, and the first symptom is a gate that sags but still swings freely.
- Weld zones pitting on galvanised and painted steel frames. Pool enclosures and older driveway gates often outlive their welds. The frame looks fine from a distance, but the weld at the bottom rail is quietly failing under a layer of rust.
- Operators with corroded wiring connections. Humidity and salt will creep into control boxes and connector blocks. We see a lot of intermittent failures in Lauderdale Lakes that turn out to be simple corrosion on a terminal, not a failed board.
- Storm-racked gates out of alignment. After hurricane season or a run of strong squalls, gates on short driveways and tight condo clearances get knocked off their tracking. The operator starts grinding or reversing mid-cycle, and the fix is realignment plus recalibration, not a new motor.
Pricing for Gate Repair in Lauderdale Lakes, FL
Gate repair in Lauderdale Lakes is priced by the repair, not by the hour, and we quote the exact cost before any work starts. Hinge replacement and gate realignment typically run $150 to $350. Post replacement with re-hanging runs $300 to $700 depending on the size of the post and the concrete work. Operator board replacement is usually $350 to $900 depending on the brand and board type, plus the service call. Rebuilding a wood gate runs $180 to $450.
What pushes a repair toward the top of these ranges is the condition of the surrounding hardware. If the hinge post is corroded through and the weld at the bottom rail is failing, that’s a structural repair, not a tune-up. Call (833) 570-5807 for a free estimate. We’ll give you a written number and you approve it before we touch anything.
We Also Serve Cities Near Lauderdale Lakes
If your property is just outside the Lauderdale Lakes city limits, we regularly serve Gate Repair in Lauderdale Lakes and the surrounding Broward communities of Broward Estates, Lauderhill, Fort Lauderdale, and Plantation. The same salt air and the same 1960s-era gate hardware show up in every one of these cities, and our technicians know exactly what they’re looking at.
Serving Lauderdale Lakes, FL — Our Local Coverage Area
We’re based in the Lauderdale Lakes area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Lauderdale Lakes
The hinge post is corroding at the ground line, which is the classic Lauderdale Lakes failure sequence. Salt air attacks the steel where it enters the concrete footing, the post weakens, and the gate settles even though the hinge hardware is still intact. The fix is a new post set in fresh concrete with stainless fixings, and the price is agreed before we start. Call (833) 570-5807 and we’ll confirm it on site.
Yes, galvanised steel lasts meaningfully longer here. Painted steel scratches and pits fast in salt-laden air, and once the paint is breached the steel underneath goes quickly. Galvanised steel carries its own sacrificial coating, so it survives the coastal exposure better, especially at weld zones. If we’re replacing a gate frame in Lauderdale Lakes, we’ll recommend galvanised or stainless components every time.
The wind racked the gate panel out of square, and the post or the hinge weld may have shifted. We were called to a low-rise condo complex off the 441/SR-7 corridor recently where a LiftMaster swing gate had started dragging and swaying after hurricane-panel season. Our tech found the original steel hinge post corroded through at the ground line and the weld at the bottom rail failing, so we cut out the footing, set a new post, and switched to stainless hinges and fixings. The swing gate operator and arm were fine once the post was corrected. That’s the typical scenario: the post fails first, not the motor.
Yes, we service all four brands and more, including Ghost Controls, Elite, Linear, Viking, and Mighty Mule. Brand-agnostic diagnosis is the whole point of our service. We recommend what your system needs, not what a single manufacturer pushes. Call (833) 570-5807 for a free estimate, and we’ll identify your operator and diagnose the fault.
Yes, automatic gates in Florida are required to have working entrapment protection: photo eyes or contact edges that stop and reverse the gate when something is in the way. Many older Lauderdale Lakes systems have degraded or non-functional safety edges, and that’s a serious risk, especially with the number of gates here on short, tight lots. We test and repair safety sensors on every electric gate repair we do. If you’re not sure yours are working, call (833) 570-5807 and we’ll check them.
Written by Ruben Castellano, Owner at Miami Gate Company, serving Lauderdale Lakes and Broward County.